What do you think will be the most pressing environmental health issues from global climate change in the next 5-10 years ?

Environmental health.

Global Climate Change is the environmental health issue . To protect the human health now and in the future there are possible solutions may be individual behavioral changes or engineering solutions or other new regulations .In this assignment you will take presidential advisor test preforming executive summary of global climate change and environmental health implications .

Some of these issues and potential solutions emerging the discussion board .Please answer :

1 .What do you think will be the most pressing environmental health issues from global climate change in the next 5-10 years ?

2 .Are current policies sufficient to protect us or do we need new policies ?

3 .will regulation alone be enough to improve environmental health outcomes if not , present alternative solution .Remember to support your ideas with references .

Answer
Submitted by phyllis young on Thu, 2016-02-11 02:03

What are the Islamic understandings of the Judaic and Christian traditions?

Q’S

 1.What are the central beliefs of Islam, and how are they reflected in the Five Pillars?

 

  1. What is the origin and importance of the Qur’an? What are the Islamic understandings of the Judaic and Christian traditions?

 

  1. How are the distinct Muslim groups similar? How do they differ?

    How have the different types of Muslims interacted in the contemporary world?

 

  1. Compare the commonalities and differences between the Qur’an recitation, Hebrew Scripture     recitation, and Christian use of scripture.

 

 

Explain how the number of employees in the company affects the company’s status if the company is not in compliance.

abor Laws

Review the key federal legislation, particularly the following:

  • Title VII of the Civil Rights Act of 1964
  • The Civil Rights Act of 1991
  • The Equal Employment Opportunity Act of 1972
  • Age Discrimination in Employment Act of 1967
  • Americans with Disabilities Act
  • The Immigration Reform & Control Act of 1986
  • Fair Labor Standards Act

Create a PowerPoint presentation for a meeting to review these laws. In your PowerPoint presentation, explain to the key managers how these laws impact the recruitment and selection process. Be aware of any other state laws that may have additional requirements.

  • In your discussion, explain how the laws intertwine. In addition, explain the repercussions for noncompliance.
  • Explain how the number of employees in the company affects the company’s status if the company is not in compliance.

Deliverable Length:  8- PowerPoint slides with notes 

All original work 

Explain why some individuals may have a higher risk of acquiring a particular disorder than others, especially if has been present in family members.

ssignment 1: Discussion Assignment

The discussion assignment provides a forum to discuss the relevant topics for this week based on the course competencies covered. Answer all questions by Wednesday, February 10, 2016. Provide a detailed response to the topic questions in the Discussion Area. For this assignment, post your responses directly in the Discussion Area. Do not use attached documents.

To support your work, make sure to utilize your course and text readings. When asked, also utilize outside sources. As in all assignments, make sure to cite your sources in your work and provide references for those citations utilizing APA format.

Start reviewing and responding to the postings of your classmates as early in the week as possible. Respond to at least two of your classmates. Participate in the discussion by asking a question, providing a statement of clarification, providing a point of view with a rationale, challenging an aspect of the discussion, or indicating a relationship between one or more lines of reasoning in the discussion. Complete your participation for this assignment by Sunday, February 14, 2016.

Treatments for mental disorder vary depending on the theory behind the mental disorder, research of various therapies, and the efficacy (success) of the treatments against the disorder. The biological approach to mental disorders is often associated with the medical model, which includes the use of medications to treat and/or manage the symptoms related to a particular mental disorder. Genetic factors have been a significant part of diagnosing disorders related to developmental disabilities, such as Down’s syndrome. However, as the understanding of genetics and their interactions with environmental catalysts grows, a greater understanding of the onset of mental disorders is also growing.

  • Describe how genetic and environmental factors may influence the onset of a mental disorder.
  • Explain why some individuals may have a higher risk of acquiring a particular disorder than others, especially if has been present in family members.
  • Describe the main types of psychotherapies; for each type, explain how it may be more effective for a particular set of disorders.
  • Describe the major types of drug classes that are used to treat mental disorders. Briefly explain how they work based on their neurochemistry.

 

Respond

This section lists options that can be used to view responses.

Expand All Collapse All Print View Show Options
Responses
Responses are listed below in the following order: response, author and the date and time the response is posted.
Sort by Read/Unread Sort by Response Sorted Ascending, click to sort descending Sort by Author Sort by Date/Time*
(an instructor response)
Expand Mark as Read Grading Rubric Faculty Clark-rapaEmail this Author 1/5/2016 10:11:38 AM
(an instructor response)
Expand Mark as Read Please Post by Wednesday Faculty Clark-rapaEmail this Author 2/8/2016 9:49:29 AM
(an instructor response)
Expand Mark as Read Remember to Participate Faculty Clark-rapaEmail this Author 2/9/2016 6:49:50 AM
(an instructor response)
Expand Mark as Read DQ

 

How did you obtain the same measurement on the Tektronix oscilloscope that you obtained using the Agilent multimeter?

also need a lab report with it as well

  1. Watch Week 1 Video Lecture 1: Introduction to Virtual Instruments from the weekly content and the video in this lab assignment on “Introduction to Virtual Breadboarding in MultiSIM”
    • Week 1 Video Lecture 1 – Introduction to Virtual Instruments (Refer to the weekly content)
    • Week 1 Video Lecture 2 – Introduction to Virtual Breadboarding in MultiSIM
    • Please note that the virtual breadboard circuitry in the “Week 1 Video Lecture 2 – Introduction to Virtual Breadboarding in MultiSIM” is incorrect and should be modified. Check this document to correct the circuitry in the video to run the DCR and Connectivity check: Modified Circuit Design
  2. Construct the circuit of problem 1 in the Week 1 Assignment with MultiSIM using 3 Vrms at 60 Hz as your source. Use the Agilent function generator for the source.
  3. Using the Agilent multimeter, measure the voltages across the source and each resistor and fill out the chart below. Do not forget to put units on the chart. Be sure to provide a screenshot of your circuit with the instruments. Note what calculated value matched the Agilent multimeter measurement. Also, use the multimeter to measure RT (hint: remove the voltage source). Provide a screenshot of your measurement.
Calculated Agilent Multimeter Tektronix Oscilloscope
VT =
VR1 =
VR2 =
VR3 =
IT =
RT =
  1. Now repeat the measurements using the Tektronix oscilloscope and fill out the chart above (RT is not required). Provide a screenshot of at least one voltage measurement. Note what is required in order to duplicate the Agilent multimeter measurement.
  2. Show the calculated and measured period of the signal from the Tektronics Oscilloscope.
Calculated period:(source frequency 60 Hz) Measured period:
  1. Now change the values of R1 given below in the table and use Tektronix oscilloscope to record the measurements. Do not forget to add units in the chart. Take screenshots to show your work for the period measurement as well as for at least one case of R1. The screenshots should show the settings of the Agilent signal generator and o-scope along with the waveforms.
  2. Complete the following chart:
Source frequency 60Hz Tektronix Oscope Measurement
R1 = 5 kohms RT =
IT =
VR1 =
VR2 =
VR3 =
R1 = 10 kohms RT =
IT =
VR1 =
VR2 =
VR3 =
R1 = 15 kohms RT =
IT =
VR1 =
VR2 =
VR3 =
R1 = 25 kohms RT =
IT =
VR1 =
VR2 =
VR3 =
Source frequency 100Hz Tektronix Oscope Measurement
R1 = 25 kohms VR1 =
Source frequency 200Hz Tektronix Oscope Measurement
R1 = 25 kohms VR1 =
  1. Using the initial circuit from step 2 and reviewing the week 1 – video lecture 2, initiate the virtual bread board feature in MultiSIM. Place components and run the DRC and Connectivity Check. Capture a screenshot of your circuit in the 3D Virtual Breadboard view including the results of the DRC and Connectivity Check. There should be zero error for the check.
  2. Based on your measurements, answer the following questions:
    1. Did your calculated and measured values match? If not, why?
    2. Does the multimeter give you the peak, peak-to-peak, or rms measurement?
    3. How did you obtain the same measurement on the Tektronix oscilloscope that you obtained using the Agilent multimeter?
    4. What is the industry practice to report AC measurements? Peak value or RMS value?
    5. Describe the effect of increasing R1 on the total resistance of the circuit.
    6. Describe and explain the effect of RT on the value of IT for a given value of VT.
    7. Does resistance depend on frequency? For a purely resistive circuit, does the voltage or current change as the frequency changes?
    8. What does DRC and connectivity check mean? If there was an error, what did you do to fix it?

Lab Template – This lab template should be used in reporting your lab reports in all of your labs.

Define the subnets (based on rooms, floor, department, or other criteria).

Computer Science

Networking Proposal Due  11th Feb 2016 @ 16:19:07 hrs, format APA

 

Subject is  Computer Science in 2 pages and need sources 5

 

 

Paper Details

 

 

OVERVIEW:

 

You will provide detailed network design proposal. Your task is to design the network for this new building with the following criteria:

 

Student-accessed computers should be on separate network from the staff-accessed computers. In addition, computers for public use should be on a separate network. The open-wifi network should also be on a separate network.

There must be a minimum of 40 Mbps Internet connection, with a backup line capable of at least 20Mbps. Cable, DSL, or FIOS should not be used for primary Internet service.

The network has been assigned the 10.13.0.0/16 network address for all computers and devices.

Your proposal will be submitted in three major parts:

 

Physical Network Design

Network Addressing

Network Services Design

To learn how you will be assessed on this assignment, please take a moment to review the rubric. The final deliverable should adhere to the following criteria:

 

Include at least five scholarly references.

Use IEEE-style citation.

Use correct network terminology.

The use of diagrams is encouraged.

Use this template as a guide while creating your Network Design Proposal (Parts 1-3).

 

PHYSICAL NETWORK DESIGN:

In this section, address each of the following.

 

Define the topology that will be used.

Select the appropriate network media.

Select the appropriate network connecting devices, including network security devices.

Select the appropriate computer systems to use to support the network design.

Determine a physical layout of the computers on the floor plan, along with the network wires (network wiring diagram).

Provide justifications for each element of your network design (numbers 1–4 above).

 

NETWORK ADDRESSING:

In this section, address each of the following.

 

Define the subnets (based on rooms, floor, department, or other criteria).

For each subnet, explain which devices/groups/users/rooms will be on this subnet, define the network address, subnet mask, and available IP addresses to be used by computers or devices.

Show the calculations on how the subnet information are calculated

 

NETWORK SERVICE DESIGN:

In this section, address each of the following.

 

Identify network services needed.

List additional servers or network devices needed to implement the network.

List network security measures to be implemented.

Justify the need for the network services, security measures, and devices you’ve selected.

 

BUILDING DETAILS:

The 50-year-old, two-story building has the following layout:

 

I have attached the floor plan with the details required for it. I also attached pictures of the rubric of what is expected for the highest grade possible and a sample template.

 

the rubric, which shows what could be done for a better grade could help explain better. The yellow highlighted portion of the rubric shows what where my points came from and the un-highlited portion is what could get me a better grade. The writer could take a look at it and see what went wrong and how to correct it. Maybe change a few things around using the rubric

Evaluate the implementation process related to strategy management.

Write an eight to ten (8-10) page paper in which you: Create a guide to leveraging expatriates. The guide should include four to six (4-6) sources that address benefits and challenges of sending expatriates to other countries. Examine the major benefits

Write an eight to ten (8-10) page paper in which you:

  1. Create a guide to leveraging expatriates. The guide should include four to six (4-6) sources that address benefits and challenges of sending expatriates to other countries.
  2. Examine the major benefits that this report can provide for the organization, and suggest two (2) uses for the information contained therein. Justify your response.
  3. Analyze the major factors (e.g., distance, cultural background, knowledge of the related countries, languages spoken, relatives who may live in another country, etc.) that would influence your choice of countries into which your company would expand. Recommend two (2) countries for expansion. Provide a rationale for your response.
  4. Determine three (3) criteria that you would consider when deciding which employees to send abroad. Justify your response.
  5. Propose the major methods and / or incentives you would use in order to encourage the selected employees to become expatriates. Provide a rationale for your response.
  6. Recommend one (1) strategy to ensure that both the Executive Committee and the Board of Directors are committed to the expansions. Justify your response.
  7. Recommend two (2) books that the selected expatriates should take with them when they go overseas. Provide a rationale for your response.
  8. Outline a guide for expatriates who will reside within another country for one to two (1-2) years. The related guide should cover the following topics: selecting items to pack, accommodating a vehicle (i.e., leave behind or send overseas), shipping or selling furniture, moving pets, and arranging accommodations for children and / or family residing in another country for the discussed length of time.
  9. Develop a framework for your presentation. The framework should include the following:
    1. Relevant visuals
    2. Statistics that support the decision to expand into the identified countries
    3. A feasibility study of your company’s proposed expansion to the countries in question
    4. Information related to renting or buying land or a building
    5. Any other information relevant to the case for expansion
  10. Use at least four (4) quality academic resources in this assignment. Note: Wikipedia and other similar websites do not qualify as academic resources.

Your assignment must follow these formatting requirements:

  • Be typed, double spaced, using Times New Roman font (size 12), with one-inch margins on all sides; citations and references must follow APA or school-specific format. Check with your professor for any additional instructions.
  • Include a cover page containing the title of the assignment, the student’s name, the professor’s name, the course title, and the date. The cover page and the reference page are not included in the required assignment page length.

The specific course learning outcomes associated with this assignment are:

  • Evaluate the implementation process related to strategy management.
  • Use technology and information resources to research issues in global management.
  • Write clearly and concisely about global management using proper writing mechanics.

Click here to view the grading rubric for this assignment.

Discuss at least two (2) possible reasons why the selected TV episode included aggression or violence. Provide a rationale for your response.

spa2

Reflect on two to three (2-3) TV shows in which characters demonstrate aggression or violence. Consider the context in which this aggression or violence occurred and ways in which it can lead to desensitization.

Write a one to two (1-2) page paper in which you:

  1. Briefly describe at least one (1) episode of a television show in which you observed aggression or violence.
  2. Identify the context in which the character(s) demonstrated aggression or violence. Include the gender, age, and culture of the character(s) involved in the aggressive or violent act(s).
  3. Discuss at least two (2) possible reasons why the selected TV episode included aggression or violence. Provide a rationale for your response.
  4. Describe at least two (2) ways that media violence can cause desensitization in people. Justify your response.

Your assignment must follow these formatting requirements:

  • Be typed, double spaced, using Times New Roman font (size 12), with one-inch margins on all sides. Check with your professor for any additional instructions.
  • Include a cover page containing the title of the assignment, the student’s name, the professor’s name, the course title, and the date. The cover page is not included in the required assignment page length.

Who was involved and what were some of the most lasting works to come out of it?

American History II

Question 1

The Harlem Renaissance was a cultural movement during the 1920’s.  Explain the different forms of art impacted during this movement.  Who was involved and what were some of the most lasting works to come out of it?  What was the biggest and most lasting impact of this movement?

response must be a minimum of 200 words in length

 

Question 2

You are an American citizen in the time period of this unit.  Write a brief letter to a citizen of another country that the united states is expanind to during this time period.  Share why, from your perspective, this expansion is good.  In the letter explain why the United states taking on an imperial position is bad from your perspective.  Include the issues of expansion, foreign policy (specifically the shift from isolationism to intervention helped the U.S. become a superpower), and trade as well as other areas of interest to you.  If it is easier you may write several short letters.

Your response should be a minimum of 300 words in length.

Discuss, with examples, at least four (4) substantive ways in which a healthy population strengthens the economy of the country that you have selected.

world

Use the Internet to research one (1) developing nation of your choice. Your research should include an examination of lending institutions, health care, and human capital, as well as the material covered by the Webtext and lectures in Weeks 6 through 9.

Write a three to four (3-4) page research paper in which you:

  1. Explore whether or not funding from international lending institutions like the World Bank and the IMF are helping or hindering the social, economic, or political development of the country that you have selected. Support your response with examples.
  2. Discuss, with examples, at least four (4) substantive ways in which a healthy population strengthens the economy of the country that you have selected.
  3. Ascertain the degree to which the leadership of your chosen country has used foreign aid to improve its health care system. Support your response with concrete examples.
  4. Use at least five (5) quality academic resources in this assignment. Note: Wikipedia, blogs, and other nonacademic websites do not qualify as academic resources. Approval of resources is at the instructor’s discretion. Resources must also be within the last seven (7) years.

When referencing the selected resources, please use the following format:

  • Webtext Format:
    • Name of the author. Name of title. Retrieved from website url.
      • Example:

Soomo. Understanding Development [Webtext]. Retrieved from http://www.webtexts.com/courses/9218-cathey.

  • Lecture Format:
    • Name of the Author. Name of the lecture [lecture type]. Retrieved from lecture url.
      • Example:

Strayer University. (2013). Understanding Development [PowerPoint slides]. Retrieved from /bbcswebdav/institution/SOC/300/1136/Week1/lecture/story.html.

  • Internet Resources:
    • Author’s Name. (Date of publication). Title of the resource. Retrieved from website url.
      • Example:

Wuestewald, Eric. (2014). Portraits of people living on a dollar a day. Retrieved from http://www.motherjones.com/mixed-media/2014/04/living-on-a-dollar-a-day-photos-renee-byer-thomas-nazario.

Your assignment must follow these formatting requirements:

  • Be typed, double spaced, using Times New Roman font (size 12), with one-inch margins on all sides; citations and references must follow APA or school-specific format. Check with your professor for any additional instructions.
  • Include a cover page containing the title of the assignment, the student’s name, the professor’s name, the course title, and the date. The cover page and the reference page are not included in the required assignment page lengt